VIBRATION MONITORING EQUIPMENT
Vibration Logger Kit
SVAN 958A Class 1 Four-channel Sound & Vibration Analyser is dedicated for all applications that require simultaneous class 1 sound and vibration assessment. Each of four input channels can be independently configured for sound or vibration detection with different filters and RMS detector time constants giving users an enormous measurement flexibility. The real advantage of SVAN 958A is the capability to perform advanced analysis simultaneously to the level meter mode. In practise this allows the user to obtain broad-band results such as Leq, RMS, LMax, LMin, LPeak together with four-channel analysis like FFT or octave band analysis.
List of available analyser functions includes FFT, 1/1 or 1/3 octave, cross spectra, sound intensity, RT 60 and more. The 4-channel time-domain signal recording to .wav format is available as well as an exceptional feature! All measurement results are stored in non-volatile 32 MB internal memory or USB memory stick and can be easily downloaded to a PC with SvanPC++ software. SVAN 958A with RS 232 interface (SV 55) can be offered with GPRS modem or LAN & WLAN connection module. Together with SvanPC++_RC (remote communication) software, these interfaces provide easy remote access to instrument settings & data over Internet and local area network. Instrument is powered from four AA standard or rechargeable batteries as well as from the external DC power source or USB interface. Robust case and light weight design accomplish the exceptional features of this new generation instrument.
Seat Vibration Monitor
SV 38V Seat Accelerometer is a triaxial Whole-Body seat accelerometer based on MEMS transducers dedicated to SV 106 instrument for Human Vibration measurements according to ISO 2631-1 requirements both on a seat pad or seat back. The SV 38V uses low voltage and consumes much less energy than IEPE accelerometers extending battery life time of SV 106 instrument. The built-in TEDS memory stores information about the accelerometer sensitivity that is automatically transferred to the SV 106 vibration analyser helping to avoid configuration errors. A full ISO 8041 in-situ calibration check for before and after measurement is possible using the SV 111 portable vibration calibrator.
Vibration & Motion Monitor and Logger
MR3000C is a compact vibration/motion measurement system built in a robust SYSCOM RED BOX. The MR3000C is equipped with a new generation of electronic components, keeping the best features of the MR2002, but adding new ones, such as a reduction in size and weight and increased computing power. MR3000C has been designed for different temporary and fixed measurements in the civil engineering and strong-motion surveys.
Key Features
- IP65 compact unit containing sensor, digital recorder and communications
- Internal or external sensor
- Accelerometers and geophone available
- External battery pack
- External display showing the most important information
- Removable memory SD Card
- Precise timing (GPS or NTP)
- Power over Ethernet (PoE)
- Wired & wireless connectivity
- Embedded Web Server for the configuration
- Event recording principle with multiple level triggers
- DDNS, OpenVPN, FTP push network capabilities
- Automatic sending of SMS and E-mail in case of event
Hand and Arm Vibration Dosimeter
SV 103 Personal Human Vibration Exposure meter is dedicated to hand-arm vibration measurements. The instrument meets ISO 8041:2005 and is the ideal choice for making measurements according to ISO 5349 and European Directive 2002/44/EC.
Hand-arm vibration is when mechanical vibrations are transmitted to the human hand when in contact with the surface of a vibrating machine such as an electric drill. This type of vibration is particularly harmful as it can cause pathological changes in the nervous system of the hands and fingers; commonly called white finger disease. As there is no cure for damage caused by vibration, the only effective regime is to take regular vibration measurements in the hazardous workplace environment and therefore ensure that damage is not caused in the first place. However, many currently used assessment methods for hand-arm vibration are subject to a very high level of uncertainty and typically vibration measurement accuracy can vary in the range of ±20% to 40% which makes a big difference in terms of white finger disease. The SV 103 from Svantek significantly decreases the measurement uncertainty as the instrument is attached to the user’s arm and is small enough to take daily vibration exposure measurements without interfering with normal working activities.
The SV 103 uses our latest accelerometer, the SV 107, that has a contact force sensor in addition to the standard accelerometer. Contact force is the sum of grip force and push force and is therefore a measurement of how firmly a user is holding the tool being measured. This is a recommendation of the new standards and the reading from the contact force sensor is also displayed on the screen. The SV 107 accelerometer is based on MEMS, the very latest in transducer technology. MEMS gives many advantages including shock resistance, very low power and frequency response down to DC. The usage of MEMS breaks the technological barrier of a weight and dimensions additionally reducing the cost of the complete system.
The SV 103 is powered using rechargeable batteries charged through the USB interface which also enables easy interconnection between the instrument and a PC. The measurement data is safely stored in the large 8 GB memory. The instrument works with our powerful “Supervisor” software which allows instrument configuration as well as the viewing and exporting of measurement data and daily vibration exposure recalculations.
The colour OLED screen that offers excellent visibility even in full daylight completes the exceptional features of this instrument.
Vibration Monitor and Logger
The Minimate Plus noise and vibration monitor consists of a Triaxial Geophone (ISEE or DIN version) and an overpressure microphone (Linear or A Weight) to provide a rugged, reliable compliance monitoring system.
For more demanding monitoring applications, the Instantel Blastware® Advanced Module software provides the capability to monitor a broad selection of vibration and overpressure sensors, as well as sensors for structural and environmental measurements. Monitor vibration, ambient environmental conditions, and the movement of structural cracks, all at the same time, all using the same Minimate Plus monitor.
Features & Benefits
- Instantel Histogram Combo™ mode allows capture of full waveform records while recording in histogram mode
- Auto Call Home feature automates remote monitoring applications
- Sample rates from 1,024 to 16,000 S/s, per channel with up to 65,000 S/s available on a single channel
- Available Instantel 8-channel option allows for two standard geophones and two microphones to be operated from one Minimate Plus monitor
- Non-volatile memory with standard 300-event storage capacity (optional 1,500-event capacity)
- Records waveform events up to 100 seconds long with standard setup, or up to 500 seconds with advanced setup
- Continuous monitoring means zero dead-time, even while the unit is processing
- Αny channel can be matched to a wide variety of sensors – geophones, accelerometers, or hydrophones
Applications
- Blast-monitoring for compliance
- Near-field blast analysis
- Pile driving
- Construction activity
- Demolition activitiy
- Heavy transportation monitoring
- Bridge monitoring
- Structural monitoring and analysis
- Underwater blast monitoring
- Remote monitoring
Solar Powered
Deep cycle batteries and solar panels to keep equipment operating autonomosuly
5G Connectivity
GPRS modem to keep you connected
Automated Reporting
Customisable automated reports to save you time and focus on what's important
Alerts
Customisable SMS, email, audible and visual alerts
Data Storage
Cloud based servers to securely store your data
Occupational Hygiene
Occupational hygiene entails identifying, evaluating, and managing workplace environmental risks to health. Our services cater to diverse needs, crafting solutions for complex hygiene and safety challenges. Our expert staff collaborates with you to implement effective hygiene management systems, crucial for meeting site and legal standards.
Asbestos & HAZMAT
We are a Licensed Asbestos Assessor (LAA) and provide hazardous material management to building owners, property developers and facility managers to meet specific client requirements including identification and risk assessment of hazardous materials, development of detailed hazardous material management plans and supervision of hazardous material remediation works.
Environmental Monitoring
Monitoring services are tailored to your needs, ranging from ENVSS staff attended monitoring to autonomous stations with remote telemetry and alerts. You can access real-time data, make informed decisions, and generate reports via our Client Portal. We understand industry demand and meet client expectations by building our equipment to be flexible, mobile, efficient, accurate and robust.
Noise & Vibration Monitoring
Our noise and vibration services cover both regulatory compliance and occupational health, with services ranging from noise monitoring, blast monitoring, earplug fit testing, human vibration testing and more. Our monitoring devices are set and forget with remote software, allowing us to capture a wealth of data spread over a timeline of your choosing.
WHY CHOOSE US?
-
LICENSED
Environmental Site Services use only trained, licensed asbestos assessors and occupational hygienists -
OUT OF HOURS
Our airborne fibre monitoring service is available all day, every day -
SAME DAY SERVICE
Same Day turnaround available 7 days a week -
AUSTRALIA WIDE
Investigations and remediation services metro and regional areas -
NATA ACCREDITED TESTING
NATA accredited volumetric sampling and analysis -
REPORT
Comprehensive report, guaranteed!